Echogear Outlet Shelf review: A brilliant, if not always practical, shelving idea

echogear with sonos play1

should be “For everything there are two purposes.” The company’s Outlet Shelf is a working example. Why should an electrical outlet just supply electricity? Why not wrap a shelf around it to hold the thing you’re supplying electricity to?

It’s a genius idea, even if it’s not quite as practical as the company’s photographs make it look. I say that because Echogear shows all kinds of gadgets plugged into outlets mounted in the middle of the wall. But the outlets in most homes are closer to the floor. I have several dozen outlets in my home, and only one of them is in the middle of the wall. And that’s because I told the contractor who built the house to put it there for a small water feature that hangs on the wall.

would be ideal location

Michael Brown

This was my preferred location for the Outlet Shelf, because I have a Wi-Fi mesh point here. But the granite backsplash nixed it.

The only other outlets that aren’t a few inches above the floor are in my kitchen, wet bar, and bathrooms, but they have granite backsplashes beneath them and the Outlet Shelf wouldn’t fit.

I really wanted to put the Outlet Shelf at my wet bar, because I have a Linksys Velop mesh point there (yes, I finally retired my old router. I picked the Velop because it supports hardwired backhaul, and there’s an ethernet port at my wet bar, too). But in addition to the presence of that backsplash, there’s a Z-Wave dimmer switch installed in the same junction box, and the Outlet Shelf will only work with single-gang boxes. It would have worked on the box where phone and ethernet jacks are installed, but Echogear doesn’t offer a cover plate with those types of cutouts.

Still, the Outlet Shelf is an awesome solution for getting smaller home electronics off your countertop, dresser top, entertainment center, or wherever they’re taking up space. This could be a small wireless speaker, like the Sonos Play:1. Or a smart speaker, like the Amazon Echo or Google Home. Or a Wi-Fi access point, a home security camera, or even battery-powered devices that need charging—be it a smartphone or a small power tool.

For some things, it doesn’t matter all that much where your outlet is located. But for speakers—especially smart speakers that have built-in directional microphones—a few inches above the floor is just not going to cut it.

echogear with linksys velop

Michael Brown

This Linksys Velop mesh point fit perfectly, with plenty of room for me to coil and zip-tie the excess power cable, which I hid behind it.

Installation

Echogear provides steel outlet covers (one duplex and one Decora style) to replace your typically plastic existing cover and longer-than-typical machine screws. You remove the existing cover (yes, you’ll need to give up anything decorative), place the shelf over the outlet, and then screw on the cover plate to hold the plastic shelf to the wall. The long screws help to ensure the weight of the shelf and whatever you put on it (you’re limited to 10 pounds) doesn’t pull them out.

[“Source-indianexpress”]

Post Author: Loknath Das

I am a blogger with the main motive of writing articles at my choice of level. I do love to write articles and keep my website updated regularly , if you love my article then be sure to share with your friends as they would love to read my article...